A complete power portfolio from one factory — modified and pure sine wave inverters, DC-DC and smart AC chargers, MPPT hybrid solar inverters, and LiFePO4 energy storage rated for 6,000+ cycles.
Thirteen products, 40+ models — from a 300W car inverter to a 15.9kWh wheeled home energy station. Click any product for full specifications.
Compact DC-AC inverters for cars, trucks and boats — smart SMT design, auto power restart, USB fast charging and full electronic protection built in.
LED digital display version showing input voltage and output power in real time — with dual universal AC sockets and USB charging on higher-power models.
Clean utility-grade sine output for sensitive electronics. Heavy-duty aluminum housing, soft start for inductive loads, multiple AC outlets.
Battery isolator and 3-stage charger in one rugged unit. Charges service batteries from the alternator — made for RVs, commercial vehicles, boats and yachts.
Intelligent household chargers with selectable current, dedicated lead-acid and lithium modes, plus battery repair mode to recover tired banks.
12V solar storage & inverter all-in-one with DSP control, MPPT (99.9%), 4 charging modes and lithium battery activation from AC or PV.
24V version of the hybrid line — pure sine SPWM output, selectable charging priorities and smart variable-speed fan cooling in a wall-mount chassis.
High-power hybrid with wide 120–450VDC MPPT range, up to 5,000W PV input, <10ms UPS switchover and 4th hybrid charging mode. CE certified.
7,987–8,038Wh lithium iron phosphate pack with 6,000+ cycle life, series/parallel capability and on-board state-of-charge display. For home storage, street lighting, base stations and RVs.
12V system pack with 3,993–4,019Wh of energy. Lightweight and portable at 30.5–31.7kg — powers 12V loads directly or scales via series/parallel.
3.5kVA hybrid inverter and 7,987Wh LiFePO4 battery fused into one plug-and-play tower on swivel wheels. Solar-priority smart allocation with seamless grid fallback.
The big brother: 5.5kVA inverter with 15,974Wh (51.2V 312Ah) of LiFePO4 storage, 5,000W MPPT input and <10ms UPS switchover. CE certified.
Wheeled battery stations with smart BMS and host communication. Move it, fix it, or scale it — multiple units connect in series and parallel for more voltage and capacity.
Verified at 70% DOD, 25°C, 0.2C — retaining ≥80% capacity at end of life. Thermal stability far beyond conventional lithium chemistries.
Full digital voltage & current dual closed-loop control produces pure sine output with <3% THD — safe for motors, pumps and sensitive electronics.
Advanced maximum-power-point tracking squeezes every available watt from your PV array, from 20V startup up to 5,000W arrays.
Over/under voltage, over-current, short circuit, reverse polarity and temperature protection — plus lithium battery activation from AC or solar.
Hybrid inverters switch to battery power in under 10 milliseconds — refrigerators, routers and lights never notice the grid went down. Pair with LiFePO4 packs for days of autonomy.
DC-DC chargers harvest alternator power on the move, sine inverters run appliances off-grid, and smart AC chargers maintain banks in storage. Built tough for boats, yachts and vans.
Store daytime PV in LiFePO4 packs and run your evening on sunshine. Four charging modes — solar only, solar priority, grid priority or hybrid — optimize against time-of-use tariffs.
Modified sine wave inverters are cheaper and fine for resistive loads like kettles and incandescent lamps. Pure sine wave inverters produce utility-grade output with <3% total harmonic distortion, which is required for sensitive electronics, inductive motors, pumps and medical equipment.
Our LiFePO4 battery packs are rated for at least 6,000 charge cycles at 70% depth of discharge (DOD), tested at 25°C with 0.2C rate. That is more than 10 years of daily cycling while retaining at least 80% of initial capacity.
The 12.8V and 25.6V LiFePO4 packs work with most 12V/24V hybrid inverters that support lithium charging profiles. The stackable all-in-one systems have a matched inverter built in, so no separate inverter is needed.
Yes. We manufacture the full product line in our own factory and offer OEM/ODM service including custom branding, labeling, packaging and parameter adjustment for distributors and installers. Send your requirements via the inquiry form for a tailored quote within 24 hours.
The PHSD/PHSC hybrid inverters switch from grid to battery in under 10 milliseconds in UPS mode (under 20ms in appliances mode) — fast enough that computers and routers stay online during a blackout.
The hybrid solar inverters and all-in-one ESS carry CE certification. All products are manufactured under ISO-quality processes, and battery packs are shipped according to UN38.3 transport requirements. Certificate copies are available on request.
Distributors, installers and EPC contractors welcome. Our engineers reply with a tailored quotation within 24 hours.
